News

Disc filter Manufacturers china is composed of juxtaposed filter units, which are mainly composed of a group of annular reinforced plastic filter discs with grooves or edges. During filtration, the sewage enters from the outside, and the rim formed by the edges of the grooves on the adjacent filter discs intercepts the solids in the water; during backwashing, the water flows from the inside of the annular filter disc to the outside, which traps the dirt on the filter disc. Rinse down and discharge through the sewage outlet. The discs are compacted and stacked together in the unit, and the grooves in the middle of the upper and lower discs play the role of filtering and intercepting. When the raw water passes through the filter unit, it flows from the outside to the inside, and the impurities larger than the groove will be intercepted outside. The core components of Disc filter Manufacturers china are stacked plastic filter discs. There are special grooves or edges on the filter discs. The grooves or edges on the adjacent filter discs form a channel of a certain size. The particle size is larger than the channel size. The suspended matter is intercepted to achieve the filtering effect.

A multi-layer metal composite Sintered wire mesh Manufacturers china for filtering relates to a metal filter screen used for media separation. The composite Sintered wire mesh Manufacturers china is filtered by at least one layer of controlled multi-layer composite mesh with the same area size The precise control net guarantees the strength of the filter net and the rigid protection net and support net, so that the filtrate can fully reach the surface of the control net. The dispersed nets are superimposed together, and the connection between the layers is formed by the point metallurgical combination. The utility model does not deform the mesh during high pressure differential filtration, does not crack between the layers, and does not separate from layers. The filter medium is in full contact at the interface of each layer, and the filtering effect is good.

The recent report on [Key Participants, Types, Applications, Countries, Market Size, and Forecast of 2028 Automotive Filter Components Market Report for 2021" provided by Credible Markets includes a comprehensive survey of geographic structure, industry size, and revenue estimates.In addition, the report also highlights the challenges that hinder the market growth and expansion strategies adopted by leading companies in the [automotive filter market". The automotive filter market report includes information on product launches, sustainability and prospects of leading suppliers, including: (TOYOTA BOSHOKU, Baowang, YBM, MAHLE, MANN+HUMMEL, Phoenix, Bosch, Universe Filter, JinWei, Freudenberg )

1. is there a fixed standard part for the sintered filter element? Can I buy standard filter element? A: sorry, the sintered filter element is not a standard part. Usually, it is produced by the manufacturer according to a series of detailed values such as the size, shape, material and filter value specified by the customer. 2. What materials can be selected for sintering filter element? A: bronze, brass, stainless steel, titanium and various alloys are common. It is common that bronze is used in sintering filter element industry, and alloy metal is the lower cost. The reason why customers need to choose other metal types or alloys may be due to different service environments, such as higher hardness, better corrosion resistance, or higher temperature. Stainless steel is also a kind of material used more, because of its heat resistance and corrosion resistance are very good. For more complex environments, nickel alloys may be needed. Of course, the cost of these alloys is relatively high and difficult to process, so the price will be higher 3. What should be paid attention to in the design of metal sintering filter element Answer: when selecting the filter element, we need to consider the filter medium, filtration value, flow rate through the filter, use environment, etc. Different uses require different filters. In design, you need to consider the following points: 1) Pore size: also in micron scale. Pore size defines the size of the media you need to filter 2) Pressure drop: refers to the liquid or gas flow through the filter pressure loss. You must determine your usage environment and provide it to the filter manufacturer. 3) Temperature range: how high is the working environment temperature of the filter element in its operation? The metal alloy you choose for the filter element must be able to withstand the temperature of the working environment. 4) Strength: sintered filter elements are the best choice for high strength. Another advantage is that they have the same strength in forward or reverse flow. 4. What information do I need to provide to the manufacturer to place an order? 1) Application: including using environment, filtering value, etc 2) Filter media 3) What should be paid attention to, such as acid and alkali resistance 4) Are there any special operating conditions, such as temperature and pressure 5) What pollutants will be encountered 6) Dimension, shape and tolerance 7) Quantity required 8) How to install

The report conducted an in-depth study of the seawater filter market, including supporting technologies, key trends, market drivers, challenges, goals, transformation and stereotypes, models, operator case studies, potential, future roadmaps, value chains, and system ecology. The report also provides forecasts for portable water filters from 2021 to 2026. The report reviewed the historical data before COVID-19, the impact of COVID-19 and after COVID-19 (TV virus) on various regions and major countries, and the impact on the future development of the industry. The report introduces the market competition pattern and the corresponding detailed analysis of the main suppliers/main suppliers in the market. Environmental companies in the global bottled water filtration market: 3M, Haier, Honeywell, Whirlpool, Panasonic, Midea, Philips, Aquafresh RO, Brita, Coway, Culligan, EcoWater Systems, Eureka Forbes, KENT RO Systems, etc. North America (North America, Canada and Mexico) Europe Germany, France, the United Kingdom, Russia and Japan) Asia Pacific (China, South Korea, India and India) South America (Brazil, Brazil, Colombia, etc.) and the United States (ports), yes, yes, Yes and yes) The impact of the portable water filter market report:-A full range of potential opportunities and risks in the water filter market. -To study in detail the business strategy of the portable water filter market enterprises. -Future development The result of the filtration performance of the future portable water filter market growth chart. -In-depth understanding of the water filter market, especially the driving factors, influencing factors and main markets. -Created a good impression in the important technologies and the latest market trends affecting the water filter market.

Customized Disc filter products include a cylindrical upper casing, a cylindrical lower casing and a filter element. The top of the cylindrical upper casing is installed with a water inlet branch pipe. The left side of the valve is connected to the water inlet main pipe, the bottom of the two-position three-way valve is installed with a sewage branch pipe, the bottom of the sewage branch pipe is installed with a sewage main pipe, the bottom of the cylindrical lower shell is installed with a water outlet branch pipe, and the bottom of the water outlet branch pipe is installed with a water outlet main pipe,The water filtration and backwashing are realized by controlling the two- position three-way valve. During filtration, the filtration is carried out through the gaps inside the multiple disk groups, and the filtration effect is good. There will be friction and increase the service life of the device.

Hastelloy wire mesh is an ultra-low carbon type, Ni, Mo, Cr series nickel-based, corrosion-resistant, high- temperature resistant Hastelloy alloy, because it has good high temperature resistance, oxidation resistance, and corrosion resistance in the weld affected zone. It has good long-term thermal stability and processability, and is used in harsh industrial environments such as agricultural chemicals, nuclear facilities, and biopharmaceuticals. In the medium of wet oxygen, sulfurous acid, acetic acid, formic acid and strong oxidizing salts, it also has excellent corrosion resistance, uniform corrosion resistance and intergranular corrosion resistance, so it is also widely used in the chemical industry. The electrical conductivity and thermal conductivity are much lower than that of low- carbon steel, while the resistivity and expansion rate are much higher than that of low-carbon steel. The molten pool has poor fluidity, poor wettability, low penetration and shallow penetration.

A filter for filtering liquids, especially a filter that is easy to clean and can be recycled. The filter includes: an outercylinder, two ends of the outer cylinder are respectively provided with an upper end cover and a lower end cover,and the outer wall of the outer cylinder has filter holes; The inner cylinder is arranged in the inner cavity of theouter cylinder, and the outer wall of the inner cylinder is provided with sieve holes; and the filter paper core isarranged in the space formed between the outer cylinder and the inner cylinder; the upper end cover is threadedlyconnected with an upper plug The upper plug is threadedly connected with an additional nozzle; the lower endcap is threadedly connected with alower plug. In summary, the editor of Overmoulded Filter on sales tells: a brief introduction to some knowledge about filters.

A stainless steel wire mesh supplier china device, including a main frame, the top view of the main frame is a quadrilateral shape, and is a hollow structure, the top and bottom of the inner cavity of the main frame are horizontally integrally formed with horizontal fixing blocks, two pieces A horizontally drawn steel wire is fixedly connected at equal distances between the horizontal fixing blocks. The left and right sides of the inner cavity in the top view of the main frame are integrally formed with vertical fixing blocks. The new Stainless Steel wire mesh supplier china device, Through the design of horizontal fixed block, vertical fixed block, one horizontal pulling wire, one vertical pulling wire and connecting wire, the design has simple structure, convenient use and strong practicability. It can effectively screen grains of different sizes at the same time, which greatly improves the screening efficiency of people, and does not need to replace the screen frequently to achieve the effect quickly.

The initial effect Wholesale Pleated Filter products include a card plate, a filter mechanism, a connecting soft rod and two card plates. The first card plate is connected with two card plates through the connecting soft rod, and the connecting soft rod includes a rubber rod and a metal rod. This The utility model is provided with one card plate and two card plates, and the first card plate and the second card plate are connected by a connecting soft rod, and at the same time, the main body of the connecting soft rod is a rubber rod, so that the filter has the ability to be folded, and The metal rod can improve the overall hardness of the connecting soft rod, and a filter mechanism is set up. At the same time, the sealing frame can facilitate people to install the filter mechanism on one card board by glue connection, and connect the soft rod and the inner side of the second card board, so as to facilitate people to replace the filter mechanism.

How does disc filtration affect continuous wastewater treatment? Miguel Gutierrez of Siemens Water Technologies explains the basics of disc filtration and how it provides an economical and sustainable solution for municipal tertiary treatment systems. In disc filters, differences in woven media and flow patterns make each technology unique to a particular application. Given that these units were sold for relatively clean water for municipal tertiary applications, the internal and external configurations are as expected. However, inside-out technologies provide better sustainability and life cycle cost. One of these is the Forty-X disc filter from Siemens Water Technologies, which provides an economical and sustainable solution for municipal tertiary treatment systems. The first disc filters introduced to the US market used an outside-in flow pattern in which the disc was completely immersed in water, solids were filtered outside the filter media, and the filtrate was collected and transported in a rotating drum and discharged from the system. Accumulated solids are removed by reversing a portion of the filtrate flow through the media shoe by rotating the backwash shoe on the entire drum/disk or by rotating the stationary disk assembly. The filter media consists of a non-woven structure that relies on a random arrangement of fibers to capture and hold particulate matter. The tissue medium covers the honeycomb structure collected around the filtration drum/pipeline. In this plant, the medium suffers from the inability of the backwash shoe to keep it clean, mainly because it is immersed in an increasing concentration of solids in the feed. As a result, these filters are often complemented by sludge removal systems and additional high-pressure cleaning devices, which adds to the complexity of the overall system. The main disadvantage of these systems is the biological growth that occurs on the inner surface (filtrate side) of the filter cloth, especially common in non-chlorinated filter feed/secondary effluents. Another problem with high pressure backwashing of these systems is the need to shut down the process to complete the cleaning. Both of these drawbacks result in long flush times, high volumes of waste and excessive requirements to ensure continuous wastewater treatment. A unique enhancement to the out-to-in disc filters: the flow pattern is reversed by feeding the filter material from the inside and immersing the outside of the material in the filtered water. This is achieved by supplying a central drum/channel with openings for supplying filter plates assembled as discs. Solid particles are deposited on the inner surface of the medium, and the filtrate is formed on the outside. The backwash is initiated by a loss of head and is carried out by high pressure jets which throw the accumulated solids back in the feed direction and are collected in chutes located in the drum/pipe itself. As the disc/drum assembly rotates, the backwash jet is drawn from the same filtered water tank. The medium is a woven polyester fabric with an absolute micron size (typically 10 microns for three reuses). This absolute micron size ensures that particles larger than the holes in the tissue are retained, and particles larger than the existing holes accumulate in the medium. The medium is collected in filter plates which are inserted into plastic boxes surrounding the feed drum/tube in a disc configuration. Each disc consists of 28 filter plates. Because the discs only filter the water, there is no need for a sludge removal mechanism, simplifying the system. Innovative pleated filter Both [inside out" and [outside in" technologies are based on a filter media configured as a flat panel. Therefore, the effective filtration area is the usable area perpendicular to the direction of flow and should not take into account the impervious surfaces of load-bearing structures such as frames, panel boxes and steel structures. The inside-out disc filter gives the filter panels a pleated shape, increasing the effective filter area by 40% compared to a flat design. It also increases the overall strength of the filter plate, allowing it to withstand higher operating head losses. The corrugated structure makes the filter plate less prone to deformation of the fabric medium. The combination of a larger filter surface area and a more robust disc filter configuration results in high throughput. In addition, the filter plate seal is hydraulically boosted, improving seal reliability and eliminating many of the leakage points inherent in the plate design. In addition to the design of the filter plate, the filter box (the outer shell of the plate) is designed to contain debris. Existing flat panel technologies have internal gussets in their filters that provide a surface for large inorganic materials such as plastic, algae ropes, rags, and other floating materials that can hang, build up, and interfere with the internal hydraulics of the filter panels. The disc filter box does not have these internal folds, so this unwanted material can freely and continuously flow and be removed from the system. The internal disc/drum assembly has a stainless steel sliding cover. This sliding cover eliminates the need to lift the heavy cover and provides access to various parts of the disk assembly for ease of inspection and maintenance. This is an advantage when installed outdoors and in windy conditions.Typical performance At the pollution control plant in Thomasville, Georgia, USA, the 40-X disc filter was tested on the production plant for several months. The installation includes jet filtration cleaning followed by bubbling aeration of secondary effluents. This test is intended to check the performance of the device and determine the operating parameters. Part of the test included peak feed solids conditions. On fig. 1 shows typical trends in Total Suspended Solids (TSS) from integrated testing. Regardless of the feedstock concentration, the effluent TSS was consistently low due to the limited opening of the woven fabric. The curve was drawn at a hydraulic load of 6 gpm/sq. foot, true effective filter area and 50% immersion. As expected, the higher the solids content, the more backwash required to keep the medium clean. On fig. 2 shows a low reject rate as a function of turbidity. The filters provide very low rejection, typically 1.5% or less. The annual cost of automated operation of backwash pumps associated with clouding phenomena is also lower. The institution needs to expand its capacity to cope with growth and the new consent ordinance. Unfortunately, the lack of available land prevented the addition of more concrete axial filters to the factory design. Therefore, the existing mobile bridge filter was replaced with a 40X disc filter (see Fig. 3). The unit is able to accommodate two 40X disc filters in half the footprint of the mobile filter to increase the capacity of the unit. In addition, the pleated filter plate configuration allows for up to 40% more filtration area with fewer disc filters. This leaves room for additional disks to be added to meet future flow requirements without changing the design or filtration system. A multinational oil company in the UAE needed to expand its facility by simultaneously processing two different waste streams from chemical plants for reuse. Expansion was complicated by the lack of space and the availability of water. One stream contains domestic wastewater components and requires only typical tertiary treatment for reuse, while the other requires additional treatment through ultrafiltration (UF) membranes for site reuse. The unit is equipped with compact disc filters as shown in Figure 4. The absolute micron rating of the woven polyester fabric in the filter panel ensures consistent wastewater quality despite changes in incoming water concentration. This results in increased throughput and fewer ultrafiltration-in-place (CIP) operations, resulting in a more economical and sustainable operation. To meet growing infrastructure needs, Kuwait has planned the construction of a state-of-the-art wastewater treatment plant with a capacity of 72 million gallons per day. The specifiers chose disc filters because they recognized the value of pleated filter panels in this high flow processing application. The filtration area is increased by 40% compared to the flat panel design, which reduces the need for single processes, resulting in savings in footprint, civil works and overall installation costs. In addition to disc filters, Siemens also offers bioprocess solutions, including fine bubble vertical loop reactors and purifiers. The problem with many infrastructure renovation projects in very densely populated areas is the lack of available space. This was the case with the modernization of Wuxi, one of China`s largest wastewater treatment plants. Since there was no room for a filtration step, the facility decided to upgrade the existing concrete contact chamber with chlorine disc filters and ultraviolet (UV) disinfection (see Figure 5). The shallow profile of the disc filter, combined with the 600 square meters (12 34 sq ft) surface area available in a pleated filter configuration, can increase the capacity of an existing concrete chlorine pool. The droughts of recent years, combined with an increased demand for drinking water for irrigation, have forced many regions of Italy, especially in the agriculturally rich south, to focus on the reuse of wastewater. In the near future, it is planned to launch more than a dozen disk filters for several communities and service providers. The Batch Sequencing Reactor (SBR) plant was in dire need of improved total suspended solids (TSS) removal without a properly functioning slow sand filter. The solution is a plug and play installation consisting of a disc filter placed on top of an existing SBR surge tank (see Figure 6). The small footprint of the filter saves the plant from additional construction work, all within the plant`s hydraulic configuration, including existing UV disinfection equipment. The facility has received limited funding for equipment and capacity upgrades. The two existing movable bridge filters required an overhaul, failed to meet the new performance requirements, and were removed and replaced with two disc filters. Another example of [plug and play", the installation can be done without replacing the duct feeding the old filter.

Knitted Wire Mesh It is also Known as Gas-Liquid Filter Demister, Shielding Metal Mesh. Knitted Wire Mesh is available in various diameters of wire that are knitted into a tubular form, then flattened into contiunous lengths and rolled up for packaging. Wire diameter: 0.10mm-0.55mm (commonly used: 0.2-0.28mm) Knitted wire mesh products are applied to those applications including cryogenic, high temperature, corrosive atmosphere, heat conductive, high usage, or special applications. Application: vibration & shock absorption, air & liquid filtration. noise suppression. gasket & sealing, heat transfer & insulation. Suitable for petroleum chemicals , industries, medicine, metallurgy, machinery, shipbuilding, automobile, tractor industries such as distillation. evaporation. filtration process, to remove entrained in the steam or gas and liquid droolets in the foam, and used as automobile and tractor air filter. Knitted mash often used as an insulation product. The standard knit of the insulation mesh is 8 stitches per inch of width and 6-8 courses per inch of length. Guanatong wire mesh is knitted without oil, which also have a good advantage of clean and flat surtace.

According to the difference of material, stainless steel welded wire mesh could be classified as the following types: 302 Stainless Steel: Low grade stainless steel alloy, very economical cost and produced as a standard stainless grade. 304 Stainless Steel: Most common stainless alloy used in wire weaving. Excellent corrosion properties and can withstand temperatures of 1100 Degrees F. 304L Stainless Steel: Similar properties as 304ss but lower carbon content to permit better welding. 310 Stainless Steel: A high temperature nickel alloy that has excellent corrosion properties. Can withstand high operating temperatures up to 1800 degrees F for extended time periods. 316ss Stainless Steel: Similar properties to 304ss but is stabilized by the addition of Molybdenum for increased resistance to chemical corrosion. 316L Stainless Steel: Similar properties as 316ss but lower carbon content to permit better welding. 317L Stainless Steel: Increased corrosion resistance compared to 316ss. L grade allows better welding. 321 Stainless Steel: Similar to 347ss and can handle high operating temperatures. Has the addition of titanium. 330 Stainless Steel: This alloy can handle operating temperatures up to 1650 Degrees F. Common applications include heat treating fixtures & baskets. 347 Stainless Steel: Has similar properties of 304ss but has the additions of Columbium for stability in high operation temperatures. 410 Stainless Steel: Has very good resistance to corrosion & oxidation. 430 Stainless Steel: Has magnetic properties similar to carbon steel but with much higher corrosion resistance. Commonly used in the food processing industry. Stainless steel welded wire mesh can last long for the corrosion resistance compared to galvanized welded wire meshes. There is no need with surface treatment, it itself has the feature of corrosion resistance. Welded steel wire mesh is ideal for mining, filtration, transportation and so on.

Knitted Wire Mesh It is also known as Gas-Liquid Filter Demister, Shielding Metal Mesh. Knitted Wire Mesh is available in various diameters of wire that are knitted into a tubular form, then flattened into continuous lengths and rolled up for packaging. Wire diameter: 0.10mm-0.55mm (commonly used:0.2-0.28mm) Application: vibration & shock absorption, air & liquid filtration, noise suppression, gasket & sealing, heat transfer & insulation. Suitable for petroleum, chemicals, industries, medicine, metallurgy, machinery, shipbuilding, automobile, tractor industries such as distillation, evaporation, filtration process, to remove entrained in the steam or gas and liquid droplets in the foam, and used as automobile and tractor air filter. Knitted mesh often used as an insulation product. The standard knit of the insulation mesh is 8 stitches per inch of width and 6-8 courses per inch of length. Guangtong Knitted Mesh machine is designed and self-developed by the R&D department. It is knitted without oil, which also have a good advantage of uniform holes and flat surface.

Stainless Steel Welded Wire Mesh Galvanized welding net is divided into two kinds of galvanizing and hot-dip galvanizing, galvanizing is often said to be cold galvanizing technology, cold galvanizing is after rust removal, showing no pollution, infiltration of the welding net hung into the special electroplating tank cathode, anode with zinc. When DC power is switched on, the zinc ions on the anode migrate to the cathode, and discharge on the cathode, so that the welding net is coated with a layer of zinc. Guangtong produce stainless steel welded wire mesh from 304 grade or 316 grade stainless steel wire in various diameters. The longitudinal and transverse wires are welded together to create a functional mesh product. This is supplied in rolls or panels. Special sizes and types can also be manufactured subject to material availability. Application: It can be mainly used in industry, agriculture, building, transportation, mine, field, lawn, cultivation, decorate machine protection, fence etc.. Advantages compare with other products: 1. High intensity anti-high temperature. 2.Better strength and strong integration. 3.Flat& even surface and strong structure. 4.Anti-rust property. 5. Not easy to loosen even be cut into parts or exerted force on the parts. 6. The minimum mesh size can be 1/5"

Wire mesh can be divided into stainless steel woven mesh, stainless steel dense mesh, stainless steel embossed mesh, and other types of wire mesh. Stainless steel woven mesh is widely used for the screening and screening of solid materials, as well as for the filtration of liquids. It involves multiple industries such as chemical engineering, food seasoning, mining, pharmaceuticals, papermaking, metal powder manufacturing, fertilizers, etc. Stainless steel dense mesh is suitable for gas, liquid filtration, and other media separation. It is widely used in precision filter press, fuel filter, vacuum filter and other industries. There are three types of wear: friction and wear, where the surfaces of metal components come into contact with each other and move; The abrasive wear caused by the impact of other metal or non-metallic materials on the metal surface, as well as the erosion wear caused by the contact between flowing gas or liquid and the metal. The wear resistance of wear-resistant steel depends on the material itself, and wear-resistant steel exhibits different wear resistance under different working conditions. Only the material itself and working conditions can determine its wear resistance. The characteristics of metal wire mesh : precision weaving; Grid rules; Reliable filtering accuracy; High compressive strength; High temperature resistance and chemical corrosion resistance; Good wear resistance; Good formability.

February 14, 2023 -- February 16, 2023 This is the first major filtering event since the pandemic, and we are excited to attend FILTECH 2023 and look forward to meeting researchers, innovators and thought leaders in the filtering industry face to face at FILTECH, the largest and most important filtering event in the world. The fair attracts exhibitors and visitors from all industries and fields worldwide, including filter manufacturers, air purifier manufacturers, water treatment equipment manufacturers, medical device manufacturers, etc. The exhibition will showcase a variety of filtration technologies and products, as well as the latest filtration technologies and research results, as well as related industry trends and development directions. The exhibition will provide a platform for exhibitors and visitors to exchange and cooperate, and promote the innovation and development of filtration technology and products. At the same time, the exhibition will also provide an opportunity for the public to learn about filtration technologies and products, raising public awareness and awareness of health and hygiene. In the process of this exhibition, our company got to know many new friends, everyone to exchange filtering experience and technology, which benefited us a lot.

About our company's new factory In January 2023, our company built a new factory, covering an area of more than 30,000 square meters. A large number of better web weaving equipment has been introduced, with more than 300 web weaving machines. At the same time, we also improve our production technology, so that we can better and more quickly complete customer orders. Improved order completion time, save time cost for customers. We will also be strict with product quality, to ensure that products must meet customer order requirements, let customers rest assured. The operation of the new plant not only improves the production capacity and efficiency of the company, but also provides a better working environment and development opportunities for employees. We will continue to be committed to providing customers with high quality products and excellent service. Our company sincerely invites everyone who is reading this article, you are welcome to visit our new factory at any time, let us have a further understanding.

High temperature resistant Pleated Filter in china, comprising a thickened casing and a filter element casing, afilter screen is arranged on the inner surface of the front end of the thickened casing, and a rear frame is movablyinstalled on the outer surface of the rear end of the thickened casing, and the thickened casing The outer surfaceof the upper end of the filter element is fixedly installed with fixed buckles at the positions close to both sides,and the inner surface of the front end of the fixed buckle is fixedly installed with fixing screw holes. The outersurface of the front end of the body is provided with a fixed outer frame, and the outer surface of the upper end ofthe fixed outer frame is provided with a reinforcing card board.